Table of Contents
Advertisement
MCT466-QC User Guide Manual
FunctAtro (Dry): This sets the MCT466-QC NIR tester to readout in moisture computed on a dry
weight basis.
Algorithm (Log): This sets the MCT466-QC NIR tester to readout using a logarithmic calculation.
Lin Mode: This changes the linear regression calibration to a "look up" table calibration.
4- Constants Engineering Page:
The constants page shown in Figure 28 below displays the current algorithm of the MCT466-QC NIR
tester. This page is used to change the NIR tester's algorithm for all constituents measured.
Process Sensors Corporation
Figure 28: Engineering Menu – Constants Page
Page 26
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MCT466-QC and is the answer not in the manual?
Questions and answers
Hi, we have a model that has not been calibrated since 2022. I **** wondering how often it should be calibrated. As well, is the moisture in dry basis or wet basis?
The document mentions "Calibration Confirmation: Calibration Check Standard" during scheduled plant maintenance but does not specify an exact frequency for calibration. The moisture measurement can be in dry basis mode, as described, where moisture is calculated as a percentage of the dry material rather than the wet material.
This answer is automatically generated