GE WattStation Installation And User Manual page 11

Step 5: Lock the WattStation unit onto the mounting bracket using the provided key
Step 6: If unit is equipped with a cellular modem, remove the oval ring and front cover and then
unplug all wires going into the modem. Be sure to take note where each wire belongs as they will
have to be replaced. Cut the zip tie that secures the wire bundle to the dead front.
Step 7: Unscrew the RFID set screw that attaches the RFID unit to the RFID bracket. Unscrew the
RFID bracket from the metallic dead front and slide the RFID assembly through the dead front
center hole.
11
© GE All Rights Reserved