Set Time Of Day - Hellenbrand PM6 IC Storm 10 Manual

SET
SET TIME
6:35
PM
SET TIME
6:35
PM
RETURN TO ROTATING DISPLAY
7

SET TIME OF DAY

=  Up Arrow
STEP 1
Step 1 - Press SET CLOCK.
Step 2 - Current Time (hour): Set the hour of the day using  or  buttons.
AM/PM toggles after 12. Press NEXT to go to step 3.
STEP 2
Step 3 - Current Time (minutes): Set the minutes of day using  or 
buttons. Press NEXT to exit Set Clock. Press REGEN to return to previous
step.
Power Loss - Lithium battery on circuit board provides up to 2 years of
time clock backup during power outages. If the power is out when battery
STEP 3
is depleted, only time of day needs to be reset, all other values are stored
in non-volatile memory. When time of day is flashing, replace lithium coin
type 2032 battery.
Battery back-up feature will be activated after 24 hours of power.
Do not forget to reset for daylight savings time.
=  Down Arrow