Standard Features; Supported Hardware Options - HP StorageWorks Reference Manual

1u rackmount tape enclosure

Hide thumbs Also See for StorageWorks:

Table of Contents

Introduction

Standard features

The standard features of the 1U tape enclosure are summarized below:

Note:

It will not automatically power up.

For a list of currently supported SCSI controllers and other hardware options, such

as tape drives and media, visit the HP web site at:

http://h18006.www1.hp.com/storage/tapestorage.html

Supports one or two 5.25 inch half-height tape drives

Separate SCSI interfaces support drives on one or two LVD/SE Wide SCSI

buses

Remote SCSI ID switches

Internal SCSI termination

Front panel power switch with indicator

140-watt autoranging internal power supply

Installation in standard 19 inch racks with round, square, or threaded holes

Daisy-chaining of two or more 1U Rackmount Tape Enclosures is not supported.

The 1U tape enclosure must be powered up manually after a power interruption.

1U Rackmount Tape Enclosure Reference Guide

Table of Contents