Introduction; Standard Features - HP StorageWorks Reference Manual

1u rackmount tape enclosure

Hide thumbs Also See for StorageWorks:

Table of Contents

Introduction

The HP StorageWorks 1U Rackmount Tape Enclosure is a rack-mountable storage system capable of

holding up to two half-height 5.25 inch tape drives. It is compatible with HP 7000, 9000, & 10000

series, HP Rack System/E, HP AlphaServer, and other standard 19 inch racks.

Figure 1

1U Rackmount Tape Enclosure

The standard features of the 1U tape enclosure are summarized below:

•

Supports one or two 5.25 inch half-height tape drives

•

Installation in standard 19 inch racks with round, square, or threaded holes

NOTE:

Daisy-chaining of two or more SCSI version1U Rackmount Tape Enclosures is not

supported.

NOTE:

The 1U tape enclosure must be powered up manually after a power interruption. It will not

automatically power up.

15100

1U Rackmount Tape Enclosure Reference Guide

Table of Contents

Do you have a question about the StorageWorks and is the answer not in the manual?