Rack Installation; Rail Mounting Kit - HP StorageWorks Reference Manual

Rack Installation

Rail mounting kit

The rack rails supplied with the 1U rackmount tape enclosure can be used to
install the unit in racks that have round, square, or threaded holes in the vertical
mounting bars. The rails will fit racks with 23 - 34 inches (58 - 86 cm) separation
between the front and rear vertical mounting bars. The rails are identical and may
be mounted on either the left or the right side.
Figure 5: Rail mounting kit components
1
2
3
1U Rackmount Tape Enclosure Reference Guide
1
2
Outer rack rails
Inner component rails
Cable support clips
2
3
15121a
15