5.2 Collective and addressable detector base
Building Technologies
Fire Safety
FDB201/221
1. Route the recess-mounted cable or surface-mounted cable with an outer
diameter of max. 6 mm directly into the detector base.
2. Ensure that the cables are flat on the bottom of the detector base. This way,
they do not pose an obstruction when inserting the detector.
min. 46
max. 79
Installing the detector bases FDB201 and FDB221
1 Detector base
Collective and addressable detector base FDB201/221
FDB201/FDB221
1
max.
Ø
4mm
Mounting/Installation
5
max.
Ø
6mm
A6V10367521_h_en_--
2015-02-02
47