Accessories; Detector Base With Loop Contact Db721; Detector Base Db722 - Siemens OH720 Technical Manual

2BStructure and function
3
20BAccessories

3.5 Accessories

3.5.1 Detector base with loop contact DB721

3.5.2 Detector base DB722

26 | 64
Building Technologies
Fire Safety
● For the mounting of point detectors
● Thanks to the loop contacts, the detector line is not
interrupted when there is no point detector installed in the
detector base.
● For the recess-mounted cable entry
● For surface-mounted cable entry, up to 8 mm cable
diameter
● Compatible with:
● Order no.: S54319-F11-A1
See also
 Detector base DB72x [➙ 36]
● For the mounting of point detectors
● Thanks to the loop contacts, the detector line is not
interrupted when there is no point detector installed in the
detector base.
● For the recess-mounted cable entry
● For surface-mounted cable entry, up to 8 mm cable
diameter
● Seal integrated in the detector base. Protection
category: IP42.
● Cable connection via spring clips
● Compatible with:
– Multi-sensor fire detector OH720
– Smoke detector OP720
– Heat detector HI720
– Heat detector HI722
– Multi-sensor smoke detector, ASA OOH740
– Neural fire detector OOHC740
● Order no.: S54319-F19-A1
See also
 Detector base DB72x [➙ 36]
A6V10212047_m_en_--
2015-05-04