2.
Select the PNC001 in the Navigator window, then browse the module and the Local
Area Network (LAN) configuration in the Inspector window, changing parameters as
necessary for your system.
3.
Right-click the PNC001, then select Add IO-Device to open the PROFINET Device
Catalog dialog. Find and select the GENIUS COMMUNICATION GATEWAY, then select
OK to add it to the I/O LAN.
4.
geniusgateway (#1)... appears in the Device Catalog tree expanded to show GENIUS
COMMUNICATIONS GATEWAY (IC695GCG001) below it. Select that, then OK.
5.
geniusgateway... now appears as an IO device in the Hardware Configuration tree
under the PNC001 with the Gateway itself appearing under it as a daughter device
(see figure below).
12
PACSystems RX3i Genius Communications Gateway Quick Start Guide
GFK-2891C