Getting Started - Denver Instrument P-114 Operating Instructions Manual

Getting Started

Installation Instructions
Your balance is designed to provide
reliable weighing results under nor-
mal ambient conditions. When
choosing a location to set up your
new balance, observe the following
so that you will be able to work with
added speed and accuracy:
§ Set up the balance on a even,
stable surface.
§ Avoid exposing the balance to
extreme heat radiation from
heaters or direct sunlight
§ Due not use the balance at temper-
atures exceeding the allowable
operating temperature range (+10°
to +30°C; 50° to 86°F) as this could
negatively affect balance operation
and accuracy.
§ Protect the balance from direct
exposure to drafts.
§ Protect the balance from aggres-
sive chemical vapors.
§ Avoid strong magnetic fields gen-
erated by other devices.
§ Avoid exposing the balance to
extreme vibrations during weigh-
ing
§ Line voltage to the balance should
be reasonably constant and free
from fluctuation.
Conditioning the Balance
Moisture in the air can condense on
the surfaces of a cold balance when-
ever it is brought to a substantially
warmer place. If you transfer the
balance to a warmer area, make
sure to condition it for about 2 hours
at the new ambient temperature,
leaving it unplugged from the power
supply. Afterwards, keep the balance
connected to the power supply.
8
Warranty
In the unlikely event that your balance
should require servicing within the
3-year warranty period, please con-
tact the office listed below for your
country, and state the model number,
serial number and the problem:
Federal Republic of Germany:
DENVER INSTRUMENT GmbH
Robert-Bosch-Breite 10
37079 Goettingen
Germany
Telephone: +49 (0) 551/209 773-0
Telefax: +49 (0) 551/209 773-9
Internet:
http://www.DenverInstrument.com
E-mail: info@DenverInstrument.de
Seal on Balances Verified for Use
in Legal Metrology in the EU*:
A protective seal is required for veri-
fied balances (see page 24). The pro-
tective seal consists of a sticker. This
seal will be irreparably damaged if
you attempt to remove it. If the seal is
broken, the validity of verification will
become void and you must have
your balance re-verified.
* including the Signatories of
the Agreement on the European
Economic Area