Warning And Safety Information - Denver Instrument P-114 Operating Instructions Manual

Denver Instrument Pinnacle Series balances meet high quality standards, and
with proper care and treatment will provide many years of trouble-free service.
Please read this manual carefully before operating your new Denver
Instrument balance.

Warning and Safety Information

Calibrate (adjust) your balance using a reference weight of the appropriate
accuracy class. A measuring instrument is only as accurate as the standard
that was used as a reference in calibration. For assistance in the selection of
reference weights, please contact Denver Instrument Company.
The operator shall be responsible for any modifications to Denver Instrument
equipment and for any connections of cables or equipment not supplied
by the Denver Instrument Company and must check and, if necessary,
Use of this product in a manner other than that specified by the manufacturer
may impair any safety protection provided by the equipment.
Do not drop objects (such as weights or samples) on the weighing pan,
as this will damage the balance's internal mechanisms.
Never lift balance by the weighing pan or pan support as this may cause
Always lift and transport the balance by its base, including when
Loads that exceed the balance's maximum capacity by 15%
This product may contain a rechargeable battery.
The user is responsible for disposing of the equipment,
including the battery, in accordance with local ordinances and regulations.
4
correct these modifications and connections.
damage to internal mechanisms.
removing the balance from the packaging.
can damage the weighing system.
!
Caution
!
Caution
!
Warning
Warning
Note:
Note: