Counting; Target Weighing/Weighing In Percent; Checkweighing; Animal Weighing - Denver Instrument P-114 Operating Instructions Manual

Counting

With the Counting application, you
can determine a number of parts of
approximately equal weight. Place
the reference sample quantity of
parts on the balance to determine the
reference weight first; the next load
on the balance is then calculated as
a number of pieces having the same
weight, based on this reference
value. The readout shows both the
piece count and the corresponding
weight, in the primary weight unit.

Target Weighing/Weighing in Percent

This application allows you to obtain
weight readouts in a percentage pro-
portional to a reference weight. The
balance will display both the percent-
age and the total weight in primary
weight unit.

Checkweighing

This application gives you plain-
language responses indicating the
relation of the load on the balance to
user-defined target and tolerance
limits.

Animal Weighing

The Animal Weighing application
is used for measuring animals that
move continuously during weighing.
This feature can also be used for
measurements taken in environ-
ments with extreme vibrations and/or
drafts.
"L" on the display indicates that the
result is shown as a locked-in display
value.

Formulation

This feature allows you to weigh
out several different components in
a single container. Simply place your
container on the pan and press the
TARE key. Add components one at
a time, pressing ENTER after each
component. The weight of each indi-
vidual component is displayed as the
primary weight, and the total weight
is shown in the secondary weight
display.

Statistics

Your balance is equipped with inter-
nal memory for 250 data records.
You can calculate and print various
statistics, including number of values,
minimum weight, maximum weight,
range, average, standard deviation
and total weight.

GLP/ISO

Your balance has a number of fea-
tures that let you configure data
records for compliance with GLP and
ISO documentation requirements.
Activate the GLP/ISO header to
include all required data on printouts.

Printing

The balance has a bi-directional
RS-232 port for communication with
serial peripheral devices, such as
a printer or computer. In addition,
the balance excluding PI... A models
has a USB port* not on verified PI... A
models for connection to a computer.
Ambient Conditions
You can adapt the balance by select-
ing the appropriate menu setting, to
compensate for ambient conditions
such as vibration and drafts.
* = not on verified PI... A models
17