Denver Instrument P-114 Operating Instructions Manual page 11

Connecting the Balance to AC Power
After conditioning the balance (see page 8), simply plug the AC adapter into
the rear of the balance and connect the adapter to an appropriate power outlet;
the balance switches on automatically. To avoid extended warm-up periods,
leave the balance plugged in and switched on at all times.
PI-225DA
§ Insert the right-angle plug from the AC adapter into the jack on the
electronics box.
USB port*
Back panel
Leveling the Balance
Level the balance any time it is installed in a new location. Make sure all four
feet touch the work surface. Adjust the leveling feet until the air bubble is
centered in the level indicator.
The number of leveling feet depends on the balance model:
Analytical models: 2 front feet
Precision models with round pan: 2 front feet
Precision models with square pan: 4 feet, one in each corner
* = not on verified PI ... A models
RS-232 Ethernet
port connection*
Power Opening
for antitheft
locking
device
11