Yamaha M-Slaz TFX150 Owner's Manual page 25

push the "SELECT" switch for two sec-
onds to confirm the setting and exit the
backlight setting mode.
If the battery voltage is less than 8.5 V,
the multi-function meter unit will enter
low-voltage mode. The backlight will
turn off, and odometer and tripmeters
will stop operating. If this occurs, have
a Yamaha dealer charge or replace the
battery.
Clock
1. Clock
The clock uses a 24-hour time system.
To set the clock
1. With the display in the odometer mode,
push the "SELECT" switch for four
seconds.
Instrument and control functions
2. When the hour digits start flashing, use
the "SELECT" switch to set the hours.
3. Push the "SELECT" switch for two
seconds, and the minutes will start
flashing.
4. Use the "SELECT" switch to set the
minutes.
5. Push the "SELECT" switch for two
seconds to start the clock.
TIP
If you do not push the "SELECT"
switch for 90 seconds, the clock will
not be set and will return to the prior
time.
Fuel meter
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear from
4-6
"F" (full) towards "E" (empty) as the fuel
level decreases. When the last segment
and fuel level warning indicator " "
start flashing, refuel as soon as possible.
When the key is turned to "ON", the
display segments of the fuel meter will
sweep once across the fuel level range
and then return to current amount in or-
der to test the electrical circuit.
TIP
If a problem is detected in the fuel me-
ter electrical circuit, the fuel meter dis-
play segments and the fuel level
warning indicator will flash repeatedly.
Have a Yamaha dealer check the vehi-
cle.
1
4