Table of Contents

Advertisement

Quick Links

Read this manual carefully before operating this vehicle.
Il convient de lire attentivement ce manuel avant la pre-
mière utilisation du véhicule.
Bitte lesen Sie diese Bedienungsanleitung sorgfältig
durch, bevor Sie das Fahrzeug in Betrieb nehmen.
MANUEL DU PROPRIÉTAIRE
BEDIENUNGSANLEITUNG
OWNER'S MANUAL
TT-R110E
TT-R110EA
5B6-28199-83

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha TT-R110EA

  • Page 1 Read this manual carefully before operating this vehicle. Il convient de lire attentivement ce manuel avant la pre- mière utilisation du véhicule. Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, bevor Sie das Fahrzeug in Betrieb nehmen. OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE BEDIENUNGSANLEITUNG TT-R110E TT-R110EA 5B6-28199-83...
  • Page 2 YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN IMPRIMÉ SUR PAPIER RECYCLÉ 2010.05-0.6×1 CR AUF RECYCLINGPAPIER GEDRUCKT (E,F,G)
  • Page 3 Read this manual carefully before operating this vehicle. OWNER’S MANUAL TT-R110E TT-R110EA 5B6-28199-83-E0...
  • Page 4 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. EC Declaration of Conformity conforming to Directive 2006/42/EC We, YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan, declare in sole responsibility, that the product TT-R110E (JYACE17W000004158–...
  • Page 5 Yamaha has met these standards without reducing the performance or economy of operation of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the recommended maintenance schedules and operating instructions contained within this manual.
  • Page 6 INTRODUCTION Weight of the rider should not exceed 60.0 kg (132 lb). AN IMPORTANT NOTE TO PARENTS: This motorcycle is not a toy. Before you let your child ride this motorcycle, you should understand the instructions and warn- ings in this Owner’s Manual. Then be sure your child understands and will follow them. Children differ in skills, physical abil- ities, and judgment.
  • Page 7 IMPORTANT MANUAL INFORMATION EAU10132 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 8 IMPORTANT MANUAL INFORMATION EAU10200 TT-R110E/TT-R110EA OWNER’S MANUAL ©2010 by Yamaha Motor Co., Ltd. 1st edition, April 2010 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd. is expressly prohibited. Printed in Japan.
  • Page 9: Table Of Contents

    TABLE OF CONTENTS LOCATION OF IMPORTANT FOR YOUR SAFETY – Spoke wheels ....... 7-17 LABELS ..........1-1 PRE-OPERATION CHECKS ..... 5-1 Adjusting the clutch free play ..7-17 Adjusting the brake lever free SAFETY INFORMATION ....2-1 OPERATION AND IMPORTANT play ........... 7-18 RIDING POINTS ........
  • Page 10 TABLE OF CONTENTS Troubleshooting ......7-32 Troubleshooting chart ....7-33 MOTORCYCLE CARE AND STORAGE ..........8-1 Matte color caution ......8-1 Care ..........8-1 Storage ...........8-3 SPECIFICATIONS ......9-1 CONSUMER INFORMATION...10-1 Identification numbers ....10-1...
  • Page 11: Location Of Important Labels

    Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer. For Canada...
  • Page 12: Tire Information

    LOCATION OF IMPORTANT LABELS For Canada INFORMATION SUR LES PNEUS TIRE INFORMATION La pression des pneus à froid doit normalement Cold tire normal pressure should be set as être réglée comme suit. follows. AVANT : 100kPa, {1.00kgf/cm }, 15psi FRONT : 100kPa, {1.00kgf/cm }, 15psi ARRIERE : 100kPa, {1.00kgf/cm }, 15psi...
  • Page 13: 3Pt-2118K-A1

    LOCATION OF IMPORTANT LABELS For Canada 3PT-2118K-A1 This spark ignition system meets all requirements THIS VEHICLE IS A RESTRICTED USE of the Canadian Interference Causing Equipment MOTORCYCLE AND IS NOT INTENDED FOR Regulations. USE ON PUBLIC HIGHWAYS. Ce système d’allumage par étincelle de véhicule respecte toutes les exigences du Règlement sur le CE VÉHICULE EST UNE MOTOCYCLETTE À...
  • Page 14 LOCATION OF IMPORTANT LABELS For Europe...
  • Page 15: 4Aa-22259-40

    LOCATION OF IMPORTANT LABELS For Europe TT-R110E 2010 5.4 kW 72 kg 5B6-2156A-10 YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN 8AC-2817L-00 100 kPa 100 kPa 1.00 kgf/cm² 1.00 kgf/cm² 15 psi 15 psi 5PG-2816R-00 4AA-22259-40...
  • Page 16 LOCATION OF IMPORTANT LABELS Familiarize yourself with the following pictograms and read the explanatory text. Read the Owner’s manual. Use unleaded gasoline only. This unit contains high-pressure Measure the tire pressure when nitrogen gas. the tires are cold. Mishandling can cause an explosion.
  • Page 17 LOCATION OF IMPORTANT LABELS Model Name ****** Max. Power *** kW *** kg Mass In Running Order 1 Year of construction **** YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN...
  • Page 18 LOCATION OF IMPORTANT LABELS For Oceania and South Africa...
  • Page 19 LOCATION OF IMPORTANT LABELS For Oceania and South Africa TIRE INFORMATION Cold tire normal pressure should be set as follows. FRONT : 100kPa, { 1.00kgf/cm } , 15psi REAR : 100kPa, {1.00kgf/cm }, 15psi 3RV-21668-A0 4AA-22259-40 3PT-2118K-A1...
  • Page 20: Safety Information

    SAFETY INFORMATION EAU41219 Safe Riding yourself conspicuous appears to Perform the pre-operation checks each be very effective in reducing the time you use the vehicle to make sure it chance of this type of accident. Be a Responsible Owner is in safe operating condition. Failure to Therefore: As the vehicle’s owner, you are respon- inspect or maintain the vehicle properly...
  • Page 21 SAFETY INFORMATION Many accidents have been caused Protective Apparel Avoid Carbon Monoxide Poisoning by error of the motorcycle opera- The majority of fatalities from motorcy- All engine exhaust contains carbon tor. A typical error made by the op- cle accidents are the result of head in- monoxide, a deadly gas.
  • Page 22 Adding accessories to your motorcycle motorcycle before riding. mended by Yamaha, even if sold and can adversely affect stability and han- Check accessory mounts fre- installed by a Yamaha dealer. dling if the weight distribution of the mo- quently.
  • Page 23 SAFETY INFORMATION Never install accessories that tor and may limit control ability, Check that the fuel cock (if would impair the performance of therefore, such accessories are equipped) is in the “OFF” position your motorcycle. Carefully inspect not recommended. and that there are no fuel leaks. the accessory before using it to Use caution when adding electri- Point the front wheel straight...
  • Page 24: Description

    DESCRIPTION EAU10410 Left view 1. Fuel cock (page 4-5) 2. Starter (choke) lever (page 4-6) 3. Fuse (page 7-27) 4. Battery (page 7-26) 5. Clutch adjusting screw (page 7-17) 6. Engine oil drain bolt (page 7-9) 7. Shift pedal (page 4-2) 8.
  • Page 25: Right View

    DESCRIPTION EAU10420 Right view 1. Spark arrester (page 7-13) 2. Seat (page 4-7) 3. Fuel tank (page 4-3) 4. Air filter element (page 7-11) 5. Spark plug cap (page 7-8) 6. Engine oil filler cap (page 7-9) 7. Brake pedal (page 4-3) 8.
  • Page 26: Controls And Instruments

    DESCRIPTION EAU10430 Controls and instruments 1. Engine stop switch (page 4-1) 2. Main switch (page 4-1) 3. Start switch (page 4-1) 4. Brake lever (page 4-2) 5. Throttle grip (page 7-15) 6. Fuel tank cap (page 4-3)
  • Page 27: Instrument And Control Functions

    INSTRUMENT AND CONTROL FUNCTIONS EAU40340 EWA10072 EAU12348 Main switch Handlebar switches WARNING Never turn the key to “OFF” while Left the vehicle is moving, otherwise the electrical systems will be switched off, which may result in loss of con- trol or an accident. The main switch controls the ignition 1.
  • Page 28: Shift Pedal

    INSTRUMENT AND CONTROL FUNCTIONS EAU12660 EAU39851 EAU12890 Engine stop switch “ ” Shift pedal Brake lever Set this switch to “ ” before starting the engine. Set this switch to “ ” to stop the engine in case of an emergen- cy, such as when the vehicle overturns or when the throttle cable is stuck.
  • Page 29: Brake Pedal

    INSTRUMENT AND CONTROL FUNCTIONS EAU12941 EAU13182 EAU13212 Brake pedal Fuel tank cap Fuel Make sure there is sufficient gasoline in the tank. EWA10881 WARNING Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions.
  • Page 30 Never siphon gaso- line by mouth. If you should swallow Your Yamaha engine has been de- some gasoline or inhale a lot of gas- signed to use regular unleaded gaso-...
  • Page 31: Fuel Tank Breather Hose

    INSTRUMENT AND CONTROL FUNCTIONS EAU13412 EAU13561 Fuel tank breather hose Fuel cock The fuel cock supplies fuel from the tank to the carburetor while filtering it al- The fuel cock has three positions: 1. Arrow mark positioned over “ON” 1. Fuel tank breather hose With the lever in this position, fuel flows Before operating the motorcycle: to the carburetor.
  • Page 32: Starter (Choke) Lever

    INSTRUMENT AND CONTROL FUNCTIONS This indicates reserve. If you run out of EAU13590 EAU37650 Starter (choke) lever “ ” Kickstarter fuel while riding, move the lever to this position. Fill the tank at the first oppor- tunity. Be sure to set the lever back to “ON”...
  • Page 33: Seat

    Do not dispose of a damaged or seat holder as shown. worn-out shock absorber as- sembly yourself. Take the shock absorber assembly to a Yamaha dealer for any service.
  • Page 34: Sidestand

    INSTRUMENT AND CONTROL FUNCTIONS EAU37490 EAU41611 Sidestand Starting circuit cut-off system The sidestand is located on the left side The starting circuit cut-off system pre- of the frame. Raise the sidestand or vents starting when the transmission is lower it with your foot while holding the in gear.
  • Page 35 With the engine turned off: 1. Make sure that the engine stop switch is set to “ ”. If a malfunction is noted, have a Yamaha 2. Turn the key to “ON”. dealer check the system before riding. 3. Shift the transmission into gear.
  • Page 36: For Your Safety - Pre-Operation Checks

    7-19, 7-20 • Adjust if necessary. • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 7-15, 7-23 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable and grip housing.
  • Page 37 FOR YOUR SAFETY – PRE-OPERATION CHECKS ITEM CHECKS PAGE • Make sure that operation is smooth. Control cables 7-22 • Lubricate if necessary. • Check chain slack. • Adjust if necessary. Drive chain 7-20, 7-22 • Check chain condition. • Lubricate if necessary. •...
  • Page 38: Operation And Important Riding Points

    1. Turn the fuel cock lever to “ON”. (choke) turned off. there is a control or function you do not 2. Turn the key to “ON” and make understand, ask your Yamaha dealer. sure that the engine stop switch is ECA11042 EWA10271 NOTICE set to “...
  • Page 39: Starting A Warm Engine

    OPERATION AND IMPORTANT RIDING POINTS EAU16640 EAU39901 ECA15441 Starting a warm engine Shifting NOTICE Follow the same procedure as for start- Even with the transmission in ing a cold engine with the exception the neutral position, do not that the starter (choke) is not required coast for long periods of time when the engine is warm.
  • Page 40: Engine Break-In

    Since the engine is brand new, do not shifting to the next higher gear. during the engine break-in period, put an excessive load on it for the first 5 immediately have a Yamaha dealer hours of operation. The various parts in EAU16710 check the vehicle.
  • Page 41: Parking

    OPERATION AND IMPORTANT RIDING POINTS EAU17171 Parking When parking, stop the engine, remove the key from the main switch, and then turn the fuel cock lever to “OFF”. EWA10311 WARNING Since the engine and exhaust system can become very hot, park in a place where pedestri- ans or children are not likely to touch them and be burned.
  • Page 42: Periodic Maintenance And Adjustment

    – possibly leading to pending on the weather, terrain, geo- that is certified (if applicable). Yamaha death. See page 2-1 for more in- graphical location, and individual use, dealers are trained and equipped to...
  • Page 43: Owner's Tool Kit

    If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you.
  • Page 44: Periodic Maintenance Chart For The Emission Control System

    From 7000 km (4200 mi) or 18 months, repeat the maintenance intervals starting from 3000 km (1800 mi) or 6 months. Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
  • Page 45: General Maintenance And Lubrication Chart

    From 7000 km (4200 mi) or 18 months, repeat the maintenance intervals starting from 3000 km (1800 mi) or 6 months. Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
  • Page 46 • Replace if necessary. Shock absorber assem- • Check operation and for oil leakage. √ 15 * • Replace if necessary. • Apply Yamaha chain and cable lube or engine oil thor- √ √ √ 16 * Control cables oughly.
  • Page 47 PERIODIC MAINTENANCE AND ADJUSTMENT EAU40000 The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
  • Page 48: Removing And Installing Panels

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU18771 Removing and installing pan- The panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed. 1.
  • Page 49: Checking The Spark Plug

    If the spark plug shows a distinctly dif- ferent color, the engine could be oper- ating improperly. Do not attempt to diagnose such problems yourself. In- stead, have a Yamaha dealer check 1. Spark plug cap the vehicle. 2. Remove the spark plug as shown, with the spark plug wrench includ- ed in the owner’s tool kit.
  • Page 50: Engine Oil

    PERIODIC MAINTENANCE AND ADJUSTMENT 2. Check the spark plug for electrode To install the spark plug EAU39844 Engine oil erosion and excessive carbon or 1. Clean the surface of the spark plug The engine oil level should be checked other deposits, and replace it if gasket and its mating surface, and before each ride.
  • Page 51 PERIODIC MAINTENANCE AND ADJUSTMENT 3. Remove the engine oil filler cap, Recommended engine oil: the drain bolt and the gasket to See page 9-1. drain the oil from the crankcase. Oil change quantity: 0.80 L (0.85 US qt, 0.70 Imp.qt) ECA11620 NOTICE In order to prevent clutch slip-...
  • Page 52: Cleaning The Air Filter Element

    Use only a dedicated parts cleaning solvent. To avoid the Recommended oil: risk of fire or explosion, do not Yamaha foam air filter oil or other use gasoline or solvents with a quality foam air filter oil low flash point.
  • Page 53 PERIODIC MAINTENANCE AND ADJUSTMENT mesh and the sponge material 2. If dirt or water is visible, remove installed, otherwise the pis- the hoses, clean them, and then ton(s) and/or cylinder(s) may reinstall them. become excessively worn. [ECA15572] 1. Spark plug lead 2.
  • Page 54: Cleaning The Spark Arrester

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU40421 3. Insert the tailpipe into the muffler, Cleaning the spark arrester and then install and tighten the The spark arrester should be cleaned bolts to the specified torque. at the intervals specified in the periodic maintenance and lubrication chart.
  • Page 55: Adjusting The Carburetor

    Therefore, most car- checked and, if necessary, adjusted as buretor adjustments should be left to a follows at the intervals specified in the Yamaha dealer, who has the neces- periodic maintenance and lubrication sary professional knowledge and expe- chart.
  • Page 56: Checking The Throttle Grip Free Play

    To prevent this cle, note the following points regarding from occurring, the valve clearance the specified tires. must be adjusted by a Yamaha dealer at the intervals specified in the periodic Tire air pressure maintenance and lubrication chart.
  • Page 57 After extensive tests, only the tires list- able, however, patch the tube ed below have been approved for this very carefully and replace it as model by Yamaha Motor Co., Ltd. soon as possible with a high- 1. Tire sidewall quality product.
  • Page 58: Spoke Wheels

    If any dam- age is found, have a Yamaha dealer replace the wheel. Do not attempt even the smallest repair to the wheel. A deformed or cracked 1.
  • Page 59: Adjusting The Brake Lever Free Play

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU44883 3. To increase the brake lever free Adjusting the brake lever free play, turn the adjusting bolt in di- play rection (a). To decrease the brake lever free play, turn the adjusting bolt in direction (b). Skip steps 4–7 if the specified brake le- ver free play could be obtained as de- scribed above.
  • Page 60: Adjusting The Brake Pedal Free Play

    The operation of the shift pedal should After adjusting the drive chain be checked before each ride. If opera- slack or removing and installing tion is not smooth, have a Yamaha the rear wheel, always check the dealer check the vehicle. brake pedal free play.
  • Page 61: Checking The Front And Rear Brake Shoes

    When checking and adjusting the drive reaches the wear limit line, have a chain slack, there should be no weight Yamaha dealer replace the brake on the motorcycle. shoes as a set. 1. Brake shoe wear indicator 2.
  • Page 62 PERIODIC MAINTENANCE AND ADJUSTMENT tion (a). To loosen the drive chain, turn the adjusting nut at each end of the swingarm in direction (b), and then push the rear wheel for- ward. NOTICE: Improper drive chain slack will overload the en- gine as well as other vital parts of the motorcycle and can lead to chain slippage or breakage.
  • Page 63: Cleaning And Lubricating The Drive Chain

    If a cable is damaged wet areas. Service the drive chain as or does not move smoothly, have a follows. Yamaha dealer check or replace it. 1. Alignment marks WARNING! Damage to the outer ECA10583 2. Locknut...
  • Page 64: Checking And Lubricating The Throttle Grip And Cable

    The operation of the throttle grip should be checked before each ride. In addi- tion, the cable should be lubricated by a Yamaha dealer at the intervals speci- fied in the periodic maintenance chart. The throttle cable is equipped with a rubber boot.
  • Page 65: Checking And Lubricating The Sidestand

    The swingarm pivots must be lubricat- face and hold it in an upright posi- be checked before each ride, and the ed by a Yamaha dealer at the intervals tion. WARNING! To avoid injury, sidestand pivot and metal-to-metal specified in the periodic maintenance...
  • Page 66: Checking The Steering

    Yamaha dealer check or re- [EWA10751] tion chart. If there is play in the wheel 2. Hold the lower ends of the front pair it.
  • Page 67: Battery

    To charge the battery stallation. NOTICE: When install- Electrolyte is poisonous and Have a Yamaha dealer charge the bat- ing the battery, be sure the key dangerous since it contains sul- tery as soon as possible if it seems to is turned to “OFF”...
  • Page 68: Replacing The Fuse

    10.0 A 4. Connect the battery coupler. 5. Turn the key to “ON”. 6. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. 1. Battery coupler 2. Fuse 3. Spare fuse If the fuse is blown, replace it as fol- lows.
  • Page 69: Supporting The Motorcycle

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU24350 a jack either under each side of the EAU24360 Supporting the motorcycle Front wheel frame in front of the rear wheel or under Since this model is not equipped with a each side of the swingarm. centerstand, follow these precautions EAU41813 To remove the front wheel...
  • Page 70 PERIODIC MAINTENANCE AND ADJUSTMENT 7. Remove the brake shoe assembly from the wheel hub by pulling it out. 1. Axle nut 1. Slot 2. Washer 2. Retainer 4. Lift the front wheel off the ground 3. Insert the wheel axle from the 1.
  • Page 71: Rear Wheel

    PERIODIC MAINTENANCE AND ADJUSTMENT 7. While applying the front brake, EAU25080 2. Remove the brake pedal free play Rear wheel push down hard on the handlebar adjusting nut, and then disconnect several times to check for proper the brake rod at the brake cam- EAU41645 fork operation.
  • Page 72 PERIODIC MAINTENANCE AND ADJUSTMENT 4. Lower the rear wheel so that it is on the ground, and then put the sidestand down. 5. Install the brake rod onto the brake camshaft lever, and then install the brake pedal free play adjusting nut onto the brake rod.
  • Page 73: Troubleshooting

    However, should your motorcycle require any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the motorcycle properly.
  • Page 74: Troubleshooting Chart

    Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the battery. 4. Battery The engine turns over The battery is good.
  • Page 75: Motorcycle Care And Storage

    Rust and corrosion can develop matte colored finished parts. Be Cleaning even if high-quality components are sure to consult a Yamaha dealer for ECA10772 advice on what products to use be- used. A rusty exhaust pipe may go un- NOTICE fore cleaning the vehicle.
  • Page 76 MOTORCYCLE CARE AND STORAGE off any detergent residue using Test the product on a small hid- 2. Apply a corrosion protection spray plenty of water, as it is harmful den part of the windshield to on all metal, including chrome- and to plastic parts.
  • Page 77: Storage

    MOTORCYCLE CARE AND STORAGE 8. Let the motorcycle dry completely EAU26152 Storage before storing or covering it. Consult a Yamaha dealer for advice on EWA14501 what products to use. Short-term WARNING Always store your motorcycle in a cool, Contaminants on the brakes or tires dry place and, if necessary, protect it can cause loss of control.
  • Page 78 MOTORCYCLE CARE AND STORAGE 2. For motorcycles equipped with a WARNING! To prevent dam- cessively cold or warm place [less fuel cock that has an “OFF” posi- age or injury from sparking, than 0 °C (30 °F) or more than 30 tion: Turn the fuel cock lever to make sure to ground the °C (90 °F)].
  • Page 79: Specifications

    Vibration on seat (EN1032, ISO5008): SAE 15W-40 0.6–0.7 mm (0.024–0.028 in) TT-R110E Will not exceed 0.5 m/s² Clutch: SAE 20W-40 TT-R110EA Will not exceed 0.5 m/s² (ZAF) Clutch type: SAE 20W-50 Vibration on handlebar (EN1032, ISO5008): Wet, multiple-disc and centrifugal –20 –10 0 10 20 30 40 50 ˚C...
  • Page 80 SPECIFICATIONS Secondary reduction ratio: Manufacturer/model: Spring/shock absorber type: 35/14 (2.500) CHEN SHIN/C-803-2 Coil spring/oil damper Transmission type: Loading: Wheel travel: Constant mesh 4-speed 115.0 mm (4.53 in) Maximum rider weight: Operation: Rear suspension: 60.0 kg (132 lb) Left foot operation Tire air pressure (measured on cold Type: Gear ratio:...
  • Page 81: Consumer Information

    Record the vehicle identification num- ber and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identification number 1.
  • Page 82 CONSUMER INFORMATION EAU48120 Vehicle Emission Control Informa- tion label (For Canada) 1. Vehicle Emission Control Information label The Vehicle Emission Control Informa- tion label is affixed at the location in the illustration. This label shows specifica- tions related to exhaust emissions as required by federal law, state law and Environment Canada.
  • Page 83 INDEX Steering, checking ........ 7-25 Storage ........... 8-3 Air filter element, cleaning ....7-11 Handlebar switches .........4-1 Supporting the motorcycle ....7-28 Swingarm pivots, lubricating ....7-24 Battery ..........7-26 Identification numbers ......10-1 Brake lever ..........4-2 Throttle grip and cable, checking and Brake lever, checking and lubricating...
  • Page 84 YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2010.05-0.6×1 CR...

This manual is also suitable for:

Tt-r110e

Table of Contents