Helmet Holder - Yamaha M-Slaz TFX150 Owner's Manual

Instrument and control functions
2. Install the two rider seat bolts, and
then tighten the bolts to the spec-
ified torque.
Tightening torque:
Bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
3. Install the passenger seat.
4
TIP
Make sure that the seats are properly
secured before riding.

Helmet holder

1. Helmet holder
The helmet holder is located on the
bottom of the passenger seat.
To secure a helmet to the helmet
holder
1. Remove the passenger seat. (See
page 4-12.)
2. Attach the helmet to the helmet
holder, and then securely install
the passenger seat. WARNING!
Never ride with a helmet at-
tached to the helmet holder,
since the helmet may hit ob-
jects, causing loss of control
and possibly an accident.
4-13
EAUE1311
1
1. Helmet
2. Passenger seat
To release the helmet from the hel-
met holder
Remove the passenger seat, remove
the helmet from the helmet holder, and
then install the seat.
[EWA10162]