Checking And Lubricating The Cables; Checking And Lubricating The Throttle Grip And Cable End - Yamaha M-Slaz TFX150 Owner's Manual

Periodic maintenance and adjustment
3. Thoroughly lubricate the drive
chain with a special O-ring chain
lubricant.
7
Checking and lubricating the
cables
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
ble ends should be lubricated if neces-
sary. If a cable is damaged or does not
move smoothly, have a Yamaha dealer
check or replace it. WARNING! Dam-
age to the outer housing of cables
may result in internal rusting and
cause interference with cable move-
ment. Replace damaged cables as
soon as possible to prevent unsafe
conditions.
[EWA10712]
Recommended lubricant:
Lithium-soap-based grease
7-25
EAUE1151
Checking and lubricating the
throttle grip and cable end
The operation of the throttle grip
should be checked before each ride. In
addition, the cable end should be lubri-
cated by a Yamaha dealer at the inter-
vals specified
maintenance chart.
The throttle cable is equipped with a
rubber cover. Make sure that the cover
is securely installed. Even though the
cover is installed correctly, it does not
completely protect the cable from wa-
ter entry. Therefore, use care not to
pour water directly onto the cover or
cable when washing the vehicle. If the
cable or cover becomes dirty, wipe
clean with a moist cloth.
EAUE1191
in the periodic