Table of Contents
Advertisement
Playing a Tape
Using the Playback Features
Auto Repeat
You can play a portion of a program or an entire program over and over again.
The portion or program cannot exceed a maximum length of 9 hours and 59
minutes.
1. Insert a pre-recorded tape and press STOP.
2. Go to the beginning of the segment you wish to repeat and press
STOP.
3. Press DISPLAY twice to bring up the time counter, then press
CLEAR to reset it to 0:00:00.
4. Press MENU•PROG on the remote to display the VCR MAIN
MENU on the TV screen.
5. Press 5 to display the SETUP OPTIONS menu.
6. Press 3 to display the CUSTOM SETUP menu.
7. Press 4 to select Auto Repeat.
8. Enter the time in hours and minutes for the length of the
program.
9. Press MENU•PROG to set and then exit the menu system.
The amount of time you enter appears in the Auto Repeat line.
10. Press PLAY.
The tape plays for the length of time you
entered, rewinds and begins play again.
11. Press STOP.
12. Follow steps 4 - 7 to turn the Auto Repeat
feature off and then exit the menu
system.
Turn off the Auto Repeat
feature for normal playback
of a tape.
24
VCR MAIN MENU
1 VCR Plus+ Programming
1 VCR Plus+ Programming
2 Timer Programming
3 Review Programs
4 Channel Setup
5 VCR Setup Options
SETUP OPTIONS
1 Interactive Guide
1 Interactive Guide
2 VCR Plus+ Setup
3 Custom Setup
CUSTOM SETUP
1 Remote Control:
1 Remote Control:
VCR1
VCR1
2 Auto TV/VCR:
ON
3 Auto Play:
ON
4 Auto Repeat:
OFF
CUSTOM SETUP
1 Remote Control:
VCR1
2 Auto TV/VCR:
ON
3 Auto Play:
ON
4 Auto Repeat:
OFF
4 Auto Repeat:
OFF
5 Panel Display:
AUTO
Repeat from 0 to -:--
Press MENU to exit
CUSTOM SETUP
1 Remote Control:
2 Auto TV/VCR:
3 Auto Play:
4 Auto Repeat:
4 Auto Repeat:
5 Panel Display:
Repeat from 0 to 0:30
Press MENU to set
CUSTOM SETUP
1 Remote Control:
2 Auto TV/VCR:
3 Auto Play:
4 Auto Repeat:
5 Panel Display:
0 Exit to Setup
0 Exit to Setup
VCR1
ON
ON
OFF
OFF
AUTO
VCR1
ON
ON
0:30
AUTO
Advertisement
Table of Contents
