Playing A Tape; Operating Instructions - RCA VR539 User Manual

Playing a Tape

Operating Instructions

To play a tape
18
1. Turn on the TV and tune it to channel 3, 4, or TV's video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in
indicator lights if the Auto TV/VCR feature is set to ON. The tape automatically
begins playback if the safety tab on the cassette has been removed and the Auto
Play feature is turned on.
EJECT
POWER
Safety Tab
3. Press PLAY, if necessary. PLAY appears in the VCR's display panel.
4. Press TRACKING up or down on the remote or CHANNEL•
down on the VCR to remove any streaks from the picture, if necessary. Details
are on page 20.
5. Press STOP on the VCR or remote.
6. Press REW.
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback. While rewinding, you can press POWER and the VCR will turn off
after rewinding.
7. Press EJECT on the VCR to eject the tape once it is completely rewound.
POWER EJECT
EJECT
indicator lights, and the VCR
VCR SLP
up or
TRACKING
VCR SLP
PLAY
REC•XPR
REW
F.FWD
PAUSE
STOP
PLAY
REC•XPR
REW F.FWD
PAUSE
STOP
STOP