Connecting Two Vcrs For Copying Tapes - RCA VR539 User Manual

Hooking Up the VCR

Connecting Two VCRs for Copying Tapes

Option A hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the CH3 CH4 switch on the playback
VCR to either channel 3 or 4.
You will tune the recording VCR to this channel
to receive the signal from the playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
5. Continue to page 7.
Option B hookup.
Use this hookup for slightly improved copy
quality and more convenient operation —
use of TV•VCR button not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
3. Plug in power cords of VCRs and TV.
4. Continue to page 7.
You will select the audio/video input L1 or on
the recording VCR to receive the signal from
the playback VCR.
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
6
A
From Antenna, Cable
or Cable Box
OUTPUT INPUT
AUDIO VIDEO AUDIO
OUTPUT INPUT
AUDIO VIDEO AUDIO
Audio/Video
Cables
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
B
From Antenna, Cable
or Cable Box
OUTPUT
AUDIO VIDEO
Audio/Video
Cables
OUTPUT
AUDIO VIDEO
Audio/Video
Cables
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
IN FROM
ANTENNA
VIDEO
OUT TO TV
3 4
CH
RF Coaxial Cable
(supplied)
IN FROM
ANTENNA
VIDEO
OUT TO TV
3 4
CH
RF Coaxial
or
Cable
IN FROM
ANTENNA
INPUT
AUDIO VIDEO
OUT TO TV
3 4
CH
IN FROM
ANTENNA
INPUT
AUDIO VIDEO
OUT TO TV
3 4
CH
RF Coaxial
or
Cable
Playback
VCR
Recording
VCR
Playback
VCR (only)
Recording
VCR