Table of Contents
Advertisement
Playing a Tape
Using the Playback Features
Time Search
The VCR searches forward or reverse for the amount of time you select from
the location where you are on the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote twice to display the TIME SEARCH
menu on the TV screen.
TIME SEARCH
Enter search time
Press FWD or REW
Press SEARCH to exit
3. Press number buttons to enter the amount of time in hours and
minutes you want the VCR to search.
Press CLEAR on the remote to correct an entry.
4. Press F.FWD on the VCR or FF on the remote to search forward or
REW to search in reverse.
5. Press STOP to stop time searching.
Go-To Search
The VCR will search for the time counter reading you select and automatically
begin playing back the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote three times to display the
GO-TO SEARCH menu on the TV screen.
GO-TO SEARCH
Current tape counter is
0:00:00
Go to counter display
0:00:00
Press FWD or REW
Press SEARCH to exit
3. Press number buttons to enter the hour(s) and minute(s) of the time
counter reading you want the VCR to search.
Press CLEAR on the remote to correct an entry.
4. Press F.FWD on the VCR or FF on the remote or REW to go to the
time counter reading you entered.
5. Press STOP to stop go-to searching.
22
0:30
Advertisement
Table of Contents
