OnoSCreen
enus
AUTO
REPEAT
Set
the
length
of
time
you
want
the
tape
to
play
in
a repeating
loop
Loop
from
0:00
to
-:--
(h:mm)
Press
CLEAR
to
turn
off
Press
MENU
to
exit
Set Auto Repeat
A tape can be set to play the same segment over and over in a repeating
loop
with the Set Auto Repeat fl,ature. Set Auto Repeat uses the VCR's memory
counter to determine
the duration of the loop.
In the laREFF, Rt_2NCt_S menu, press the 7 button to choose 3"t,tAzao R#'.heat: The
Set AJ_to Repeal menu will ask lk)r a loop end time to be specified:
•
The CLEAR butlon will erase all three numbers
enl*,red and move the cursor
back to the first position (hours).
•
The Press CLtMR to tJ¢rn q[)_'message will appear only after the first number
has been enwred
into the end time,
•
Auto Repeat is set back to -:-- by resetting lhe dialog box, ejecting a tape,
powering
oil" the VCR, power interruption,
or by recording start.
When
a duration
time has been
set:
•
The VCR will automatically
switch to rewind if the counter meets or goes
past lhe set Aulo Repeat duration.
•
The VCR will automatically
switch lo playback
during rewind if the counl*,r
equals or is less than 0:0(L
•
The Auto Repeat may be adjusted by setting the counter to 00:00. This can
be done by pressing the CLEAR button while the tape counter is on screen
or on the t)ront panel display.
•
The counter will not reset while rewinding
in an Auto R*,peat loop.
23