Numbers
(0 through
9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 - - appears on the screen. Then press the other
two numbers.
OFF Turns a compatible
TV off and on.
VOL Up and Down
Raises and lowers sound of TV.
PLAYI NG A TAPE
1.
Tune the TV to your VCR viewing channel (3, 4, or TV's video
input).
2.
Insert a tape in the VCR.
n
/
\
o
If the Auto Play feature
is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is removed).
•
Press FWD or REV (FORWARD or REVERSEon remote) to
position the tape.
•
Press PLAY.PAUSE (if necessary) on the VCR (PLAY on remote)
to begin tape play.
•
Press PLAY.PAUSE (PAUSE on remote) for stop action.
•
Press TRACKING up or down to remove any streaks from the
picture, if necessary.
•
Press STOP.EJECT on VCR (STOP on remote) to stop playback.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
Automatic
Tracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking
is turned on whenever a tape is
inserted or the VCR's power is
turned on.
22