1010 Keyboard
Note: You might be instructed to slide the keyboard frame forward or backward in some of the following
steps. In this case, ensure that you do not press or hold the keys while sliding the keyboard frame.
Otherwise, the keyboard frame cannot be moved.
Removal steps of the keyboard
1. Take the tool out of the new keyboard package. Insert the tabs
TrackPoint buttons and the trackpad
TrackPoint buttons. Then remove the two TrackPoint buttons
Note: If the keyboard must be removed to access other FRUs, you need the keyboard removal tool
(product part number: 01LX856) to remove the keyboard. You can purchase the tool as a separate FRU
at:
https://support.lenovo.com/partslookup
a
b
2. Loosen the screws that secure the keyboard
Step
Screw (quantity)
4
M2 × 1.65 mm, flat-head, nylon-coated (2)
1
. Slightly pivot the tool downward
.
4
.
a
and
b
into the slot between the
2
to release the left and right
3
.
Color
Torque
Silver
0.143 Nm
(1.4 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
63