1030 Wireless LAN card
Note: This information is only for the user-replaceable modules.
For access, remove this FRU:
• "1020 Base cover assembly" on page 67
Removal steps of the wireless LAN card
Step
Screw (quantity)
2
M2 × 2.2 mm, flat-head, nylon-coated (1)
When installing:
Plug the gray cable into the connector labeled MAIN or 2 on the card, and plug the black cable into the
connector labeled AUX or 1 on the card.
1040 Wireless WAN card
For access, remove this FRU:
• "1020 Base cover assembly" on page 67
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
69