Lift-Away With Floor Nozzle; Storage - Shark NV350UKC Owner's Manual

Table of Contents

Advertisement

Lift-Away
with Floor Nozzle
®
CLEAN THE FLOOR IN DETACHABLE CANISTER
MODE
1
Press the extension wand release button and pull
the extension wand up.
2
Attach floor nozzle onto the end the extension wand.
(Fig. 17)
11
0800 862 0453
Fig. 17
3
Press the On/Off switch to the "I" position to turn
the vacuum on for above-floor cleaning.
NOTE: The rotating brush will not rotate in
Detachable Canister mode.

Storage

Quick
Cord Release
Lower Cord
Storage Clip
Fig. 18
STORE YOUR VACUUM SAFELY
1
Convert your vacuum back to upright vac mode.
2
Rotate the upper quick cord release to its upright
position and coil the power cord loosely around the two
clips. Clip the plug onto the cord to secure. (Fig. 18)
3
Store the dusting brush and the crevice tool on the
mounts on the accessory holder.
4
Store your vacuum cleaner safely in a cool dry area
where it will not be a hazard, will not get damaged
and will not cause damage to anyone or anything.
NOTE: Empty dust cup after cleaning and prior
to storing. (See "Maintenance" section for
instructions.)
To reduce the risk of electric shock, unplug the unit
before performing any cleaning, maintenance, or
troubleshooting checks.
Reassemble all parts securely before operating
vacuum.
DO NOT operate the vacuum without the pre-motor
filters and dust cup in place.
DO NOT operate the vacuum with WET filters.
IMPORTANT: Make sure all filters are completely
dry before inserting back into vacuum.
WARNING: Never insert sharp objects into any
opening to clear an obstruction.
IMPORTANT: Damages caused while clearing or
attempting to clear blockages are not covered under
your product's limited warranty.
www.sharkclean.eu
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents