Lift-Away® Mode; Above-Floor Cleaning; Lift-Away Cleaning With Nozzle - Shark Lift-Away XL UV550 Series Instructions Manual

LIFT-AWAY® MODE
Use the handle on top of the
dust cup to easily lift and
carry the canister.
a
b
Fig. 13
LIFT AWAY® DETACHABLE CANISTER FOR
PORTABLE CLEANING
1 Press the Lift-Away button, then lift the
canister off the floor nozzle.
2 To clean with the handle, press the
Handle Release button (a) and lift the
handle out of the wand. To clean with
longer reach, press the Wand Release
button (b) and lift off the wand. (Fig. 13)
10
Fig. 14
3 Attach desired accessory onto the end of
either the wand or the handle.
4 Move the selector switch to Setting I
(Bare Floor) for above-floor cleaning.
(Fig. 14)
Adjust the suction
release collar to
a
reduce suction
for easier push
Fig. 15
Suction
and pull on thick
Release Collar
carpets and area
rugs.

ABOVE-FLOOR CLEANING

1
Press the handle release button to detach
the handle or press the wand release
button to detach the wand.
2 Attach desired accessory onto the end of
either the wand or the handle. (Fig. 15)
3 Your vacuum has tremendous suction
power. Increase or decrease suction
power by adjusting the suction release
collar on the handle. To reduce suction
for lighter jobs such as cleaning
delicate surfaces like drapes, rotate the
collar counterclockwise. To increase
suction when cleaning floors or using
accessories, rotate the collar clockwise.
(Fig. 15)
4 Move the selector switch to Setting I for
above-floor cleaning.
Fig. 16
LIFT-AWAY CLEANING WITH NOZZLE
®
1
Press the wand release button and pull
the wand up.
2 Attach floor nozzle onto the end of the
wand. (Fig. 16)
3 Move the selector switch to the Setting I.
NOTE: The brushroll will not spin in Lift-
Away mode.
s h a r kc l e a n . c o m
11