Lift-Away; Above-Floor Cleaning; Lift-Away ™ With Floor Nozzles - Shark NV360 Series Owner's Manual

Above-Floor Cleaning

Release suction when
dusting delicate
objects, furniture or
draperies.
a
Fig. 11
Suction
Release Collar
CLEAN ABOVE THE FLOOR IN UPRIGHT VAC
OR PORTABLE LIFT-AWAY
1
Press the handle release button and pull the handle
up or press the extension wand release button and
pull the extension wand up.
2
Attach desired accessory onto the end of either the
extension wand or the handle. (Fig. 11)
3 Your vacuum has tremendous suction power.
Adjust the amount of suction with the suction
release on the handle. Open the valve (a) by
rotating the collar 90˚ anticlockwise for low
suction when doing light jobs such as drapes
or fine surfaces. Close the valve (a) by rotating
the collar clockwise 90˚ for high suction and
when using the hand held pet power brush.
(Fig. 11-a)
4
Press the On/Off switch to the "I" position to turn
the vacuum on for above-floor cleaning.
IMPORTANT: Ensure vacuum is in upright position.
Do not use position "II" when cleaning above the
floor in the upright vac mode as this will engage
the motorised floor nozzle. The rotating brush may
damage your floor if run for a prolonged period of
time in one area.
11 1-800-798-7398
MODE
™

Lift-Away

With Floor Nozzles
™
Fig. 12
CLEAN THE FLOOR IN DETACHABLE CANISTER
MODE
1
Press the extension wand release button and pull
the extension wand up.
2
Attach desired floor nozzle onto the end the
extension wand. (Fig. 12)
3
Press the On/Off switch to the "I" position to turn
the vacuum on for above-floor cleaning.
NOTE: The rotating brush of the motorised floor
nozzle will not rotate in Detachable Canister mode.