Download Print this page

Shark NAVIGATOR NV350W Owner's Manual

Shark vacuum cleaner user manual.
Hide thumbs


Owner's guide
NV350W_26_IB_ENG_101201.indd 1
10-12-01 3:17 PM


   Summary of Contents for Shark NAVIGATOR NV350W

  • Page 1

    Owner’s guide NV350W NV350W_26_IB_ENG_101201.indd 1 10-12-01 3:17 PM...

  • Page 2: Important Safety Instructions


  • Page 3

    6. DO NOT allow young children to operate the vacuum or use as a toy. Close attention is necessary when used by or near children. 7. DO NOT use vacuum cleaner if it has been dropped, damaged, left outdoors, or submerged in water. Return to EURO-PRO Operating LLC for examination, repair, or adjustment.

  • Page 4: Specifications

    This manual covers model number: NV350W 26 TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz Watts: 1200W Amps: TOLL FREE: 1-800-798-7398 NV350W_26_IB_ENG_101201.indd 4 10-12-01 3:17 PM...

  • Page 5: Table Of Contents

    Contents Thank you for Getting Started purchasing Mode 1: Upright Vac the Shark ® Mode 2: Detachable Canister Navigator Above-Floor Cleaning Lift-Away. With Floor Nozzle Storing Maintenance Ordering Parts Troubleshooting Guide Warranty NV350W_26_IB_ENG_101201.indd 5 Emptying the Dust Cup Cleaning the Pre-Motor Filters...

  • Page 6: Product View

    Getting Started FIRST THING’S FIRST, YOU NEED TO KNOW WHAT’S IN THE BOX YOU JUST OPENED: Hose Handle with Stretch Accessory Holder Extension Wan Detachable Canist zzle Motorized Floor Brush No Crevice T 24” Crevice Tool Dusting Br Turbo Brush *Note: Optional tools are available for sale for any NV350 model.

  • Page 7: Modes

    Your new Shark Navigator Lift-Away vacuum cleaner can easily be configured into different ® cleaning modes to meet all your cleaning needs: upright vacuum and detachable canister - both with constant suction power. Fig. 5 MODES: UPRIGHT VAC Upright vacuuming - floors and carpets. (Fig. 5) NV350W_26_IB_ENG_101201.indd 7...

  • Page 8: Mode 1: Upright Vac

    Mode 1: Upright Vac To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or converting modes. WARNING: The On/Off switch is on the top of the detachable canister. Always ensure the power is OFF (“O”...

  • Page 9

    Cord Hook Release Collar Fig. 10 TO USE: Rotate the cord release to quickly release the power cord. Secure the power cord in the cord hook (a). (Fig. 10) = Brush Roll ON = Bare Floor = OFF Press the On/Off switch (b) to the “I” position to vacuum bare floors (straight suction only) or to the “II”...

  • Page 10: Mode 2: Detachable Canister

    Mode 2: Detachable Canister You can carry your vacuum cleaner in both modes by the carry handle located on top of the dust cup. Fig. 12 LIFT AWAY DETACHABLE CANISTER FOR PORTABLE CLEANING Separate the detachable canister from the floor nozzle.

  • Page 11: Above-floor Cleaning

    Above-Floor Cleaning Fig. 14 Suction Release Collar CLEAN ABOVE THE FLOOR IN UPRIGHT VAC OR DETACHABLE CANISTER MODE Press the handle release button and pull the handle up or press the extension wand release button and pull the extension wand up. Attach desired accessory onto the end of either the extension wand or the handle.

  • Page 12: Storing

    Store the dusting brush and the crevice tool on the mounts on the accessory holder. Store your vacuum cleaner safely in a cool dry area where it will not be a hazard, will not get damaged and will not cause damage to anyone or anything.

  • Page 13: Emptying The Dust Cup

    COMPONENT Dust Cup Pre-Motor Foam Filter Pre-Motor Felt Filter Post-Motor HEPA Filter Fig. 19 EMPTYING THE DUST CUP The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when the dust cup appears full. Undo the latches on the sides of the dust cup by lifting them up and outwards to remove the dust cup from the motor base.

  • Page 14: Cleaning The Post-motor Hepa Filter

    Maintenance - cont’d Fig. 21 Fig. 22 CLEANING THE POST-MOTOR HEPA FILTER Remove the filter cover from the front of the vacuum by pulling up on the tab and pulling the cover away from the vacuum. (Fig. 21) Take out the HEPA filter by pulling it straight out. Turn the filter over so that the dirty side is on the bottom and vigorously tap it clean against a garbage can to remove any dust.

  • Page 15: Cleaning The Motorized Floor Brush

    Rotating Brush Fig. 26 CLEANING THE MOTORIZED FLOOR BRUSH When your motorized floor brush needs cleaning or locks onto an object, it automatically shuts down to prevent damage to your lifetime belt. The indicator light will illuminate red warning you to turn off the vacuum and clear blockage immediately.

  • Page 16: Motorized Floor Brush

    Maintenance - cont’d Fig. 28 Fig. 29 • Remove the dust cup and extension wand and separate the detachable canister from the motorized floor brush. Look in all 4 openings for any blockages. (Fig. 28) Motorized Floor Brush • Detach the hose on the motorized floor brush at the top by squeezing the tabs together and pulling out, and at the bottom by pulling out the connector.

  • Page 17: Troubleshooting Guide

    (See “Checking for Blockages” for instructions.) This vacuum cleaner is equipped with a motor protective thermostat. If for some reason your vacuum overheats, the thermostat will automatically turn the unit off. Should this occur, perform the following steps to restart the motor thermostat: 1.

  • Page 18: Warranty

    Product Registration Please visit or call 1-800-798-7398 to register your new Shark product within ten (10) ® days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

  • Page 19

    Notes NV350W_26_IB_ENG_101201.indd 19 10-12-01 3:18 PM...

  • Page 20

    Euro-Pro Operating LLC Newton, MA 02459 CAN: Ville St-Laurent, QC H4S 1A7 English: 1-800-798-7398 Copyright © 2010 Euro-Pro Operating LLC Printed in China Illustrations may differ from actual product. NV350W.E.101201 NV350W_26_IB_ENG_101201.indd 20 10-12-01 3:18 PM...

Comments to this Manuals

Symbols: 0
Latest comments:
  • Anna Jan 09, 2018 12:35:
    My brush won't turn .... I already took away debry and hair and no luck , vut the green lights on . please help!!!!!
  • Beryl Jan 06, 2018 04:38:
    The light on my shark on the head is red and the roller dose not spin, have checked but it not clogged up
  • JOHN Shegina Oct 28, 2017 03:45:
    This vacumn instructio​n are worthless.​ clue anywhere to clean except how to plug in that’s it. Can’t even use it since sucktion is full and no way of emptying.

    I’d donate toa non-profit corporatio​n but would not be very fair...not even my enem!

    The​re are so many vacumns that outshines this one, Never again for Shark!!!!!
  • Stephen Garrett Nov 08, 2014 05:08:
    Hello, is there are manual showing how to disassembl​e a Shark Navigator vacumn? While extracting pet hair from the suction hole on the vacumn, my wife pulled out a pencil sized plastic tube with a spiny on the end. I'm trying to determine where this object goes. Any assistance is appreciate​d.
    Stephen Garrett