Setting Groups; Test; Authorization; Led Test - ABB Relion RES670 Operator's Manual

1MRK511251-UEN B
11.6.10
11.6.11
11.6.12
11.7
Operator's manual

Setting groups

Main menu/Test/Function status/Setting groups
Displays available setting groups and indicates which of them is in use.

Test

Main menu/Test/Function status/Test
Displays the parameters ACTIVE, OUTPUT and SETTING. The ACTIVE
parameter indicates whether the IED is in test mode or not, the OUPUT parameter
indicates whether test mode has been activated by a binary input and the SETTING
parameter indicates whether or not test mode has been activated by a setting. The
output data is binary (0 or 1).

Authorization

Main menu/Test/Function status/Authorization
Shows if any user is logged on and if any user is blocked by invalid password.

LED Test

Main menu/Test/LED test
The Test LEDs menu enables the operator to activate LEDs manually. LEDs that
do not light up are defective. Defective LEDs are also logged in Disturbance
records under Monitoring.
Section 11
Test the IED
65