Ethernet Configuration - ABB Relion RES670 Operator's Manual

Section 9
Read and change settings
9.2.2.3
38
Includes available instances of GOOSE binary receive (GOOSEBINRCV) where
setting Operation can be set On or Off.
IEC61850–8–1
Main menu/Settings/General settings/Communication/Station communication/
IEC61850–8–1
Includes settings for the IED name,Operation (On/Off) and GOOSE.
Multicommand send
Main menu/Settings/General settings/Communication/Station communication/
MultiCommandSend/MULTICMDSND:x
Includes available instances of Multicommand send settings allowing the user to
adjust the maximum and minimum cycle time.
Multicommand receive
Main menu/Settings/General settings/Communication/Station communication/
MultiCommandReceive/MULTICMDRCV:x
Includes available instances of Multicommand receive settings allowing the user to
adjust the maximum and minimum cycle time, the pulse duration and mode of
operation. The mode of operation is either steady or pulsed.
Configuration parameters for IEEE1344 and C37.118 protocol
PMUCONF
Main Menu/Settings/General settings/Communication/Station communication/
PhasorMeasurement/PMUConfiguration.
Displays the settings available for Phasor data commmunication function.

Ethernet configuration

Main menu/Settings/General settings/Communication/Ethernet configuration/
Front port
The IP Address and IP mask for the ethernet port on the front panel of the IED are
set here. These are generally used when connecting a PC directly to the IED.
Remember that this is a static IP address and that the appropriate network settings
must also be made in the PC.
Main menu/Settings/General settings/Communication/Ethernet configuration/
Rear OEM-Port AB
The IP address, IP mask and Mode for the IEC 61850-8-1 communication using the
Optical Ethernet Module (OEM) at the rear of the IED are set here.
1MRK511251-UEN B
Operator's manual