View Binary Output Values; Overview; Binary Output Module Bom; Signal Matrix For Binary Outputs Smbo - ABB Relion RES670 Operator's Manual

1MRK511251-UEN B
11.4
11.4.1
11.4.1.1
11.4.1.2
11.5
11.5.1
11.5.2
11.5.3
Operator's manual

View binary output values

Overview

Binary output values show the status of each individual output in the Binary output
module (BOM). If the signal matrix tool is used binary outputs are depicted as
virtual outputs. Note, that only modules installed in the IED are shown in the HMI.

Binary Output Module BOM

Main menu/Test/Binary output values/Binary output modules
Displays available binary output modules BOM. The status and name of each
binary outputs that each module has are displayed here. The name of each output is
user defined string. The names of binary outputs are changed in the setting menu.

Signal matrix for binary outputs SMBO

Main menu/Test/Binary output values/SMT binary outputs
Displays available sets of binary output values. Each set or instance of binary
outputs displays the status of all individual binary outputs.

Function test modes

Overview

With the IED, in test mode the different protections (except line differential
protection) can be individually released for test here. Events can be disabled or
enabled.

Current protection

Main menu/Test/Function test modes/Current protection
Test of phase overcurrent protection,residual overcurrent protection.

Voltage protection

Main menu/Test/Function test modes/Voltage protection
Test of two step overvoltage, two step undervoltage and two step residual
overvoltage protection.
Section 11
Test the IED
55