Communication; Station Communication - ABB Relion RES670 Operator's Manual

Section 11
Test the IED
11.6.9
11.6.9.1
64
Displays available instances of the function (TIMERSET). The output data type is
boolean and indicates whether the output from the timer pickup is delayed (ON) or
if the drop out (OFF) is delayed.

Communication

Station communication

GOOSE binary receive
Main menu/Test/Function status/Communication/Station communication/
GOOSEBinReceive/GOOSEBINRCV:x
Available GOOSE binary signals can be viewed here. There are a number of signal
indications per set.
MultiCommand send
Main menu/Test/Function status/Communication/Station communication/
MultipleCommandSend/MULTICMDSND:x
The MultiCommand Send indication is used to display data from the Local Optical
network (LON).
MultiCommand receive
Main menu/Test/Function status/Communication/Station communication/
MultipleCommandReceive/MULTICMDRCV:x
The MultiCommand Receive indications displayed here show available sets of
output data. Each set of output data has a number of signals. Other information
displayed here shows whether there has been a change in data and whether data is
valid.
Phasor data reporting
Main Menu/Test/Function status/Communication/Station communication/
PhasorMeasuremeny/PMUReport/General
Displays status of time synchronization and connection to phasor data concentrator.
Main Menu/Test/Function status/Communication/Station communication/
PhasorMeasuremeny/PMUReport/Measurements
Displays measurements from the phasor data report function.
Main Menu/Test/Function status/Communication/Station communication/
PhasorMeasuremeny/PMUReport/Binary output values
Displays status of the binary signals connected to the phasor data report function.
1MRK511251-UEN B
Operator's manual