Fault Locator Lmbrflo; Generic Measured Value Mvggio; Event Function; Logical Signal Status Report Binstatrep - ABB Relion RES670 Operator's Manual

Section 9
Read and change settings
9.2.6.8
9.2.6.9
9.2.6.10
9.2.6.11
9.2.7
9.2.7.1
44
Analog signals
Main menu/Settings/General settings/Monitoring/Disturbance report/Analog
signals(RADR)/Channel xx-yy
There are some groups of a number of channels with a number of analog signals
per channel. Each signal has some settable parameters such as operation, Nominal
value and trig values.

Fault locator LMBRFLO

Main menu/Settings/General Settings/Monitoring/FaultLocator(RFLO)/
LMBRFLO:1
Displays available instance of fault locator LMBRFLO with some parameters.

Generic measured value MVGGIO

Main menu/Settings/General Settings/Monitoring/
GenericMeasuredValue(GGIO)/MVGGIO:x
Displays available instances of settings for the Measured value function MVGGIO
with a number of settable parameters. These settings are used to define the range of
values used in the function block and to set the threshold values. This is a generic
function and therefore the input values depend on the application.

Event function

Main menu/Settings/General settings/Monitoring/EventFunction/EVENT:x
The Event function menu consists of several sets of settable parameters EVENT
where the SPA channel mask, LON channel mask, Event mask and minimum
repetition interval can be set.

Logical signal status report BINSTATREP

Main menu/Settings/General settings/Monitoring/BinarySignalStatusReport/
BINSTATREP:x
The Binary signal status report BINSTATREP settings consist of some sets of
settable parameters with one settable parameter per instance.

Metering

Overview

Under metering there are settings for the Pulse counter function. There are some
instances of the Pulse counter function. Each instance can be switched on or off
and a number of parameters can be adjusted.
1MRK511251-UEN B
Operator's manual