APEXi POWER FC Instruction Manual page 75

Function Select
1. Boost Cntl kit
2. Air-Flow Warn.
3. Injector Warn.
4. Knock Warning
5. 02 F/B Control
* Only 414-N029 setting item di ers from the gure.
ｱﾘ=On
ﾅｼ=O
About setting item
[Boost Cntl kit]
When the optional boost control kit is not used, the [O ] Setting is
necessary.
[Air-Flow Warn.]
When this setting is set to [on]. The engine check lamp blinks when the
air ow metres have reached there measurement limit.
[Injector Warn.]
When this setting is set to [on]. The engine check lamp blinks when the
injection duty exceeds 98%.
[Knock Warning]
When this setting is set to [on]. The engine check lamp blinks when the
knocking level exceeds 60.
[02 F/B Control]
When this setting is set to [on], enables closed-loop operation.
[Inj/AirF Warn]
* 414-N029 speci c menu
When this setting is set to [on]. The engine check lamp blinks when the
injection duty exceeds 98%, or when the air ow metre reaches it's
measurement limit.
[O2 Sensor Reg]
* 414-N029 speci c menu
Turn this setting to [on] if the Power-FC is installed in a BNR32.
4th chapter - FC commander operation method
②Selects item.
③Turn option n or o .
ﾅｼ
ｱﾘ
ｱﾘ
ｱﾘ
ｱﾘ
第4
②Selection
③On
③O
Return
It returns to the etc. menu.
(Default On)
(Default On)
(Default On)
(Default On)
(Default On)
(Default On)
(Default O )
75