APEXi POWER FC Instruction Manual page 36

Indicates engine control state (continued)
４．
View the peak value.
About the renewal of peak value
Peak value is renewed, when numerical
indication, or the graph being indicatory
with monitor mode only.
At the time of basic menu indication,
when doing map trace indication with
setting mode and other modes and
monitor mode, peak value is not
renewed.
Peak indication
Peak indication
Injection Duty
89.0
36
Peak indication
is done.
50.0
％
Peak reset
Resets the
Peak value
Normal indication
Numerical indication
Injection Duty
50.0
Cancel peak indication
After the Ignition power source is reset, or
the peak reset is pressed, the present
highest value is the peak value.
Injection Duty
50.0
50.0
Peak value reset
％
Cancelles the
peak indication
％