Setting Mode; Ignition Timing Map - APEXi POWER FC Instruction Manual

Setting mode

Ignition timing map

Rpm, it is possible in the horizontal shaft to modify the ignition timing map of the
20×20 which consists of engine load to vertical axis, in optional ignition timing.
１．
In the basic menu screen select the [setting] option.
monitor
setting
etc.
２．
In the setting menu screen select the [Ign Map] option.
Ign Map
Inj Map
AirFlow
Injector
Boost
３．
The ignition timing map is showm on the screen.
Select the point where the data is to be modi ed.
RPM axis
Ign N01 N02 N03 N04 N05
Load axis
L01 16
L02 15 26 36 42 49
L03 13 24 34 41 48
L04 10 23 32 38 47
L05 8
High load
40
Acceler.
Ign/Inj
Cranking
Wtr Temp
Rev/Idle
High RPM
26 37 44 49
21 29 36 43
It returns to the basic menu.
Return
Ignition
timing
Return
It returns to the
setting menu.
①Selection
②Decision
①Selection
②Decision
①Selection
②Decision
① Select the map point
to modify
②When the map point is
selected, it moves to the
data modi cation screen.