Before Travelling, Verifying Idling - APEXi POWER FC Instruction Manual

Before travelling, verifying idling

Power-FC does engine control same as genuine engine control unit as an engine control
unit, but in order to revise the idling malfunction due to the individual di erence of the
vehicle idling study is done.
Immediately after the Power-FC installation, it does not do early idling study and
travels directly, the idling malfunction and after the travelling there is a possibility of the
engine stall and very much it is dangerous. By all means, after doing idling study, please
travel. Furthermore, idling study while idling has always gone excluding the time and the
like of engine cold.
１
Please start the engine,
warm up.
２
Please verify idling with
each conditional each
one of the page the
right.
20
By all means "using the engine before"
of the front section, please verify
contents.
Preparation which veri es idling
・Please warm up the engine.
・Circulating water temperature
・
If you purchased the optional FC commander,
[monitor]->[1~8channel] so you can verify
coolant temperature.
If you didn't purchase the FC commander,
Verify idling after the genuine temperature
gauge stabilises
"For verifying idling following the
respective condition of the condition"
of surrounding under the right page, to
"the veri cation method of idling" the
upper surrounding, please do the study
of idling.