It Is Possible With Other Modes - APEXi POWER FC Instruction Manual

It is possible with other modes

Program version and the corresponding engine model..........68
Other modes [etc.]->[Prog. Version]
Program version and corresponding engine type of Power-FC and
the FC commander are indicated.
The input/output signal is indicated................................................69
Other modes [etc.]->[Sensor/SW check]
ON/OFF of the sensor voltage switch of various input/output signals
of Power-FC is indicated. At the time of engine check lamp illumination
please verify abnormal item with this mode. Numerical value it reverses
indicates the time of sensor abnormal occurrence.
Original function is set ..........................................................................74
Other modes [etc.]->[Function Select]
It sets whether it does power FC individual functional air ow sensor
warning, injector warning, knocking warning and O2 sensor feedback.
In addition, it sets optional boost control kit presence.
Contrast and back light are adjusted ...............................................76
Other modes [etc.]->[LCD/LED adjust]
The contrast adjustment of LCD and brightness control of LED back
light are done.
The data is initialised ..............................................................................77
Other modes [etc.]->[All Data Init.]
It initialises all data, resets to the early data at the time of factory
shipment.
3rd chapter - FC commander operation summary
31