Monitor Mode; It Indicates Engine Control State - APEXi POWER FC Instruction Manual

Monitor mode

Indicates engine control state
Select the number of data sources to be displayed at a time 1,2,4,8. Select data
from the 10 items in the below-mentioned table, such as ignition timing, Injector
opened valve ratio, and vehicle speed. The data can be displayed as a numerical
indication or graphical representation. Peak hold indication can only be used
with the numerical indication.
1. InjDuty ..... Injector opened valve ratio
2. IgnTmng ..... Ignition timing
3. AirFlow ..... Air ow sensor voltage
4. EngRev ...... Engine rpm
5. Speed ...... Speed of vehicle
* Depending upon the vehicle, [AirTemp] Inhalation air temperature my not work.
１．
Select [monitor] from the basic menu screen.
monitor
setting
etc.
Basic menu
２．
In the monitor menu screen, selects the number of
indicatory items [1Channel]~[8Channel].
１Ｃｈａｎｎｅｌ
２Ｃｈａｎｎｅｌ
４Ｃｈａｎｎｅｌ
８Ｃｈａｎｎｅｌ
Ｍａｐ Ｔｒａｃｅｒ
Monitor menu
34
6. Boost ....... Inhalation pressure
7. Knock ....... Knocking level
8. WtrTemp ..... Engine water temperature
9. AirTemp ..... Inhalation air temperature
10. BatVolt ..... Battery voltage
Returns to the
Returns
basic menu.
①Selection
②Decision
①Selection
②Decision