APEXi POWER FC Instruction Manual page 41

４．
The data modification picture is indicated.
Rpm, load and ignition timing is indicated.
RPM lattice No.
Ne 1: 800rpm
Load lattice No.
Ld 1: 0...
[ 16° ] [ ** ° ]
->
Current value
It is possible to select modi cation
place even in this picture.
5．
Ignition timing is modi ed.
RPM lattice No.
Ne 1: 800rpm
Load lattice No.
Ld 1: 0...
[ 16° ] [ 20° ]
->
Current value
Load
It is the value which is calculated from the inhalation air quantity and the rpm
which is measured by the air ow metre.
Rpm
Load
Rpm
Load
New value
4th chapter - FC commander operation method
Return
Returns to the
map screen.
Return
No changes are made,
returns to the ignition
timing map screen.
①Selection
②Decision
①The data the place
where it modi es is
selected,
② When it decides,
data modi cation becomes
possible.
①Selection
①Selection
②Decision
① Increases and decreases
the value
② Saves changes
41