Installing A Circuit Board In The Pix 535 - Cisco PIX 501 Hardware Installation Manual

Chapter 7 PIX 535

Installing a Circuit Board in the PIX 535

The information in this section refers to all models of the PIX 535.
This section includes the following topics:
•
•
•
•
•
•
•
PIX 535 Circuit Board Options
Table 7-4
supports up to ten interfaces. A maximum of eight interfaces are available with a restricted license, and
ten interfaces are available with an unrestricted license.
Note Table 7-4
fewer interface options.
Table 7-4
options.
Table 7-4
Restricted Interface Options
8 GE
8 GE + 1 VPN Accelerator
7 GE + 1 FE
7 GE + 1 FE + 1 VPN Accelerator
6 GE + 2 FE
6 GE + 2 FE + 1 VPN Accelerator
5 GE + 3 FE
5 GE + 3 FE + 1 VPN Accelerator
4 GE + 4 FE
4 GE + 4 FE + 1 VPN Accelerator
3 GE + 5 FE
3 GE + 5 FE + 1 VPN Accelerator
2 GE + 6 FE
2 GE + 6 FE + 1 VPN Accelerator
78-15170-01
PIX 535 Circuit Board Options, page 7-13
Circuit Board Slot Description, page 7-15
Installing a Circuit Board, page 7-16
PIX Firewall 16 MB Flash Circuit Board, page 7-17
PIX Firewall VPN Accelerator Circuit Board, page 7-19
Gigabit Ethernet Circuit Board, page 7-19
Installing the PIX 535 DC Model, page 7-20
lists the optional circuit board combinations that are available for the PIX 535. The PIX 535
applies only to PIX Firewall Version 6.1(1) and later. Earlier versions of PIX Firewall support
lists the possible choices available for the PIX 535 restricted and unrestricted interface
PIX 535 Interface Options
Unrestricted Interface Options
9 GE
8 GE + 1 FE
8 GE + 1 VPN Accelerator
7 GE + 2 FE
7 GE + 1 FE + 1 VPN Accelerator
6 GE + 3 FE
6 GE + 2 FE + 1 VPN Accelerator
5 GE + 4 FE
5 GE + 3 FE + 1 VPN Accelerator
5 GE + 1 FE + 1 4-port FE
5 GE + 1 FE + 1 4-port FE + 1 VPN Accelerator
4 GE + 5 FE
4 GE + 4 FE + 1 VPN Accelerator
4 GE + 2 FE + 1 4-port FE
Cisco PIX Firewall Hardware Installation Guide
Installing a Circuit Board in the PIX 535
7-13