Cisco PIX 501 Hardware Installation Manual page 51

Chapter 4 PIX 515/515E
Step 4 Attach the back cover plate making sure that the connecting flange on the circuit board goes through the
slot on the back cover plate as shown in
Figure 4-22 Attaching PIX 515/515E Back Cover Plate
Attach the screw to hold the circuit board's connecting flange to the cover plate, and install the screws
Step 5
to attach the cover plate to the PIX 515/515E unit.
Reattach the top panel.
Step 6
Figure 4-23 4-Port Circuit Board Overlap
78-15170-01
Installing a Circuit Board in the PIX 515/515E
Figure 4-22.
Overlap
Cisco PIX Firewall Hardware Installation Guide
4-19