Cisco PIX 501 Hardware Installation Manual page 109

Chapter 7 PIX 535
Table 7-1
Table 7-1
LEDs
POWER
ACT
Figure 7-4
Figure 7-4
Console
Table 7-2
Table 7-2 PIX 535 Rear Panel LEDs
LEDs Status
100 Mbps On
Off
ACT On
LINK
FDX On
Off
78-15170-01
lists the state of the PIX 535 front panel LEDs.
PIX 535 Front Panel LEDs
Status Description
On Unit has power.
On On when the unit is the active failover unit. If failover is present the light
is on when the unit is the active unit.
Off Off when the unit is in standby mode.
shows the PIX 535 rear panel LEDs.
PIX 535 Rear Panel LEDs
DB-15
failover
USB Slot 8 Slot 6
port
Slot 7 Slot 5
RJ-45
lists the state of the PIX 535 LEDs.
Description
100 megabits per second 100BaseTX communication.
If the light is off during network activity, that port is using 10 megabits per second data
exchange.
Shows network activity.
Shows that data is passing through that interface.
Shows that the connection uses full-duplex data exchange where data can be transmitted and
received simultaneously.
If this light is off, half duplex is in effect.
Slot 4 Slot 2 Slot 1
Slot 3
Cisco PIX Firewall Hardware Installation Guide
PIX 535 Product Overview
Slot 0
7-3