Changing Emc Protection Class; Changing Emc Protection Class - Mu2 - Vacon 20 X Installation, Technical And Maintenance Manual

Commissioning
6.2

Changing EMC protection class

The EMC protection class of Vacon 20 X can be changed from class C2 to class C4. This is done
as described below:
Warning! Do not perform any modifications on the AC drive when it is connected
to mains.
6.2.1

Changing EMC protection class - MU2

Remove the three screws on the EMC plate from the unit.
1
Figure 29.Changing of the EMC class in MU2 control unit.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
vacon • 46
6