Download Print this page

Advertisement

Quick Links

Connecting Cisco EHWIC-3G-EVDO-x to the
Network
Revised: January 2011, OL-24264-01
This guide describes how to connect the EVDO versions of the 3G wireless Enhanced High-Speed WAN
Interface Cards (EHWICs) to your network.
3G Wireless WAN EHWIC Overview
The EHWIC-3G-EVDO-x card is a multiband, multiservice WAN card. Its primary application is WAN
connectivity as a backup datalink for critical data applications and as a primary WAN connection.
The EHWIC-3G-EVDO-x card supports the ISR G2 platforms (the Cisco 1900 series, the Cisco 2900
series and the Cisco 3900 series).
The EHWIC-3G-EVDO-x card houses one cellular modem for connection to a wireless WAN.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Prerequisites, page 6(
Restrictions, page 6

Advertisement

loading

Summary of Contents for Cisco EHWIC-3G-EVDO

  • Page 1: Table Of Contents

    The EHWIC-3G-EVDO-x card is a multiband, multiservice WAN card. Its primary application is WAN connectivity as a backup datalink for critical data applications and as a primary WAN connection. The EHWIC-3G-EVDO-x card supports the ISR G2 platforms (the Cisco 1900 series, the Cisco 2900 series and the Cisco 3900 series).
  • Page 2: Ehwic-3G-Evdo

    • Standalone GPS • Short Message Service (SMS) • EHWIC-3G-EVDO-x is the Cisco part number for which the interface card is configured and x is a variable representing carrier-specific versions. The EHWIC-3G-EVDO versions currently available are: EHWIC-3G-EVDO-B (BSNL) • EHWIC-3G-EVDO-S (Sprint) •...
  • Page 3 Connecting Cisco EHWIC-3G-EVDO-x to the Network EHWIC-3G-EVDO Table 1 describes the LED functions of the EHWIC-3G-EVDO cards. Table 1 EHWIC-3G-EVDO LED Description Description WWAN LED Off: EHWIC in reset mode or not powered. Slow Green Blink: Searching for service. Modem status and data transmission Solid Green: Active service;...
  • Page 4 Connecting Cisco EHWIC-3G-EVDO-x to the Network EHWIC-3G-EVDO Figure 3 shows the bottom view of EHWIC-3G-EVDO. Figure 3 Bottom View of EHWIC-3G-EVDO Connecting Cisco EHWIC-3G-EVDO-x to the Network...
  • Page 5: Default Antenna And Antenna Extension

    Connecting Cisco EHWIC-3G-EVDO-x to the Network Default Antenna and Antenna Extension Default Antenna and Antenna Extension EHWIC-3G-EVDO cards ship with the default antenna (3G-ANTM1919D) and the default antenna extension, a base with a 10-foot cable (3G-AE010-R): Cisco Multiband Swivel Mount Dipole Antenna (3G-ANTM1919D) antenna •...
  • Page 6: Prerequisites

    Limitations of 3G wireless EHWIC cards include the following: The 3G wireless EHWIC card must be installed in an EHWIC slot. To determine which slots on your • platform support HWICs, see the Cisco Interface Cards for Cisco Access Routers guide: http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/oview_i c.html The 3G wireless EHWIC cards are only supported on ISR G2 platform •...
  • Page 7 Connecting Cisco EHWIC-3G-EVDO-x to the Network Connecting an Antenna to EHWIC-3G-EVDO Wireless Access Devices Safety Guidelines and Warnings The following are guidelines for wireless access devices: Do not touch or move antenna(s) while the unit is transmitting or receiving. •...
  • Page 8 Before you connect the antennas, install the 3G wireless EHWIC in the router. For more information, Note see the Installing Cisco Interface Cards in Cisco Access Routers guide: http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/inst_ic.html In addition to antenna orientation, installation location with respect to other wireless equipment and other RF noise sources, such as telecom and datacom equipment, plays a significant role in determining overall network performance.
  • Page 9 Supported Cisco Antennas and Cables Table 2 lists the Cisco antennas that are supported for use on 3G wireless WAN EHWIC cards. Table 2 Cisco Antennas Supported on the 3G Wireless EHWIC Cards Maximum Gain and...
  • Page 10 Connecting Cisco EHWIC-3G-EVDO-x to the Network Connecting an Antenna to EHWIC-3G-EVDO Table 2 Cisco Antennas Supported on the 3G Wireless EHWIC Cards (continued) Maximum Gain and Cisco Part Number Antenna Type Frequency Range Description 3G-ACC-OUT-LA Lightning Arrestor 800 MHz to 2200...
  • Page 11 Connecting Cisco EHWIC-3G-EVDO-x to the Network Connecting an Antenna to EHWIC-3G-EVDO Figure 5 shows the various antenna options for 3G wireless WAN EHWIC cards. Figure 5 Antenna Options Cisco Multiband Swivel-Mount Dipole Antenna (3G-ANTM1919D) Router with 3G Wireless EHWIC Cisco 3G-AE010 to 15-R...
  • Page 12 Connecting an Antenna to EHWIC-3G-EVDO Connecting Swivel-Mount Dipole Antennas If you are using Cisco swivel-mounted dipole antennas, follow these steps: Attach an antenna to each TNC antenna connector on the front of the EHWIC card and tighten it Step 1 hand-tight.
  • Page 13: Related Documents

    For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
  • Page 14 Obtaining Documentation, Obtaining Support, and Security Guidelines Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.