Advertisement
Quick Links
Installing the FlexWAN and Enhanced FlexWAN
Modules
This chapter contains the following sections:
•
•
•
Preparing to Install the FlexWAN or Enhanced FlexWAN
Module
Before you can install the FlexWAN or Enhanced FlexWAN modules, you must install at least one
Note
supervisor engine in the chassis. Throughout this publication, the term supervisor engine refers to
Supervisor 720 Engine.
The following tools adn equipment are required to install the FlexWAN and Enhanced FlexWAN
modules:
•
•
•
Preventing Electrostatic Discharge Damage
OL-8357-01
Preparing to Install the FlexWAN or Enhanced FlexWAN Module, page 1-1
Installing the FlexWAN and Enhanced FlexWAN Modules, page 1-3
Installing a FlexWAN or Enhanced FlexWAN Module Port Adapter, page 1-6
3/16-inch flat-blade screwdriver for the captive installation screws on the FlexWAN and Enhanced
FlexWAN modules.
Antistatic mat or antistatic foam.
Your own electrostatic discharge (ESD)-prevention equipment or the disposable grounding wrist
strap included with all upgrade kits, field-replaceable units (FRUs), and spares.
Electrostatic discharge (ESD) damage, which can occur when electronic cards or components are
improperly handled, results in complete or intermittent failures. Port adapters and processor
modules consist of printed circuit boards that are fixed in metal carriers. Electromagnetic
interference (EMI) shielding and connectors are integral components of the carrier. Although the
metal carrier helps to protect the board from ESD, use a preventive antistatic strap during handling.
C H A P T E R
Cisco FlexWAN and Enhanced FlexWAN Modules Installation Guide
1
1-1
Advertisement
Related Manuals for Cisco FlexWAN
Summary of Contents for Cisco FlexWAN
- Page 1 Preparing to Install the FlexWAN or Enhanced FlexWAN Module Before you can install the FlexWAN or Enhanced FlexWAN modules, you must install at least one Note supervisor engine in the chassis. Throughout this publication, the term supervisor engine refers to Supervisor 720 Engine.
- Page 2 Chapter 1 Installing the FlexWAN and Enhanced FlexWAN Modules Preparing to Install the FlexWAN or Enhanced FlexWAN Module Follow these guidelines for preventing ESD damage: Always use an ESD wrist or ankle strap, and ensure that it makes maximum contact with the skin.
- Page 3 Only trained and qualified personnel should be allowed to install or replace this equipment. Warning In the procedure that follows, the FlexWAN and Enhanced FlexWAN modules are installed into the horizontal slots of a Cisco 7613 router chassis. (see Figure 1-2).
- Page 4 Chapter 1 Installing the FlexWAN and Enhanced FlexWAN Modules Installing the FlexWAN and Enhanced FlexWAN Modules Install port adapters on the FlexWAN or Enhanced FlexWAN module (see the “Installing a FlexWAN or Step 2 Enhanced FlexWAN Module Port Adapter” section on page 1-6).
- Page 5 The show module command displays “Ok” status and “Mod Online Diag Status” only after the FlexWAN or Enhanced FlexWAN module has booted completely. While the FlexWAN or Enhanced FlexWAN module is booting (the STATUS LED is orange or red), the “Ok” status and the “Mod Online Diag Status” is unknown.
-
Page 6: Required Tools And Equipment
Installing a FlexWAN or Enhanced FlexWAN Module Port Adapter This section describes how to install a port adapter in the FlexWAN or Enhanced FlexWAN module in the Catalyst 6500 series switches or Cisco 7600 series routers. You can install port adapters in either port adapter bay 0 or port adapter bay 1. -
Page 7: Handling Port Adapters
If there is a blank port adapter on the FlexWAN or Enhanced FlexWAN module in which you want to install a new port adapter, you must first remove the module from the chassis, and then remove the blank port adapter. - Page 8 Installing a New Port Adapter in an Enhanced FlexWAN Module This section describes how to first remove a port adapter from an Enhanced FlexWAN module, then how to install a new port adapter into its bay. (The procedure for the FlexWAN module is similar.)
-
Page 9: Warnings And Cautions
Chapter 1 Installing the FlexWAN and Enhanced FlexWAN Modules Installing a FlexWAN or Enhanced FlexWAN Module Port Adapter Warnings and Cautions Observe the following warnings and cautions when installing or removing port adapters. Do not slide a port adapter all the way into the slot until you have connected all the required cables. - Page 10 Chapter 1 Installing the FlexWAN and Enhanced FlexWAN Modules Installing a FlexWAN or Enhanced FlexWAN Module Port Adapter Cisco FlexWAN and Enhanced FlexWAN Modules Installation Guide 1-10 OL-8357-01...