Advertisement
Connecting Cisco EHWIC-3G-EVDO-x to the Network
Default Antenna and Antenna Extension
EHWIC-3G-EVDO cards ship with the default antenna (3G-ANTM1919D) and the default antenna
extension, a base with a 10-foot cable (3G-AE010-R):
•
•
Connect the default antenna to the main antenna connector on the EHWIC card. If you need to move the
antenna to a better location, connect the antenna to the extension and then connect the extension's cable
to the main antenna connector on the card.
Figure 2
Cisco 3G-AE010-R antenna extension.
Figure 4
2
1
Cisco Multiband Swivel Mount Dipole Antenna (3G-ANTM1919D)
Cisco Single-Port Antenna Stand for Multiband TNC Male-Terminated Portable Antenna
(3G-AE010-R)
antenna extension
The 3G-AE010-R antenna extension is the same as 3G-AE015-R except for the length of the
Note
antenna cable. The 3G-AE015-R antenna extension comes with a 15-foot cable.
shows the Cisco 3G-ANTM-1919D multiband swivel-mount dipole antenna connected to the
Cisco 3G-ANTM1919D Antenna Connected to the 3G-AE010-R Antenna Extension
1
Cisco 3G-ANTM-1919D antenna.
Default Antenna and Antenna Extension
antenna
2
Cisco 3G-AE010-R antenna extension base
Connecting Cisco EHWIC-3G-EVDO-x to the Network
5
Advertisement
