Table of Contents
Advertisement
Safety instructions
5) Battery tool use and care
a. Ensure the switch is in the off position before inserting battery pack.
Inserting the battery pack into power tools that have the switch on invites
accidents.
b. Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
c. Use power tools only with specifically desig nated battery packs. Use of
any other battery packs may create a risk of injury and fire.
d. When battery pack is not in use, keep it away from other metal objects
like paper clips, coins, keys, nails, screws, or other small metal objects that
can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns of a fire.
e. Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritations or burns.
6) Service
a. Please use a qualified expert who uses original replacement parts to repair
your power tool. This will ensure proper functioning of the power tool.
b. Caution! The use of any accessories or additional tools other than those
recommended in this manual may lead to an increased risk of injury. Only
use original replacement parts.
Special safety instructions
• Compare the maximum number of revolutions allowed of the accessories
with the number of revolutions of the machine.
• When you put the machine away the engine must be switched off and
moving parts must have reached a standstill.
• Never attach an assembly spanner to your machine with a piece of string
or anything similar.
• Do not use sandpaper intended for larger sanding pads. Larger sandpaper
will extend beyond the sanding pad causing snagging, tearing of the
paper or kick-back. Extra paper extending beyond the sanding pad can
also cause serious lacerations.
• Use a clamping device for securing the work piece.
• Keep your hands away from the work piece.
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: POT-250
OTM6008 Ma-GB-IRE 1006-15.indd 9
9
6/15/10 4:04:43 PM
Advertisement
Table of Contents
