750W JIGSAW WITH LASER
If you are requested by the manufacturer to return the item for
repair please complete the enclosed section and send it together
with your product and your receipt (proof of purchase) to the
service address shown below.
Name:
Address:
Contact Telephone No.:
E-mail:
Location of purchase:
Fault Description:
In order to deal with your enquiry as quickly and efficiently as possible, we ask you to send your
enquiry by email (technical@omegawolf.co.uk). Do not forget to include your name, address and a
daytime telephone number.
Alternatively, you can contact our freephone service hot-line on the number given below.
Office hours are as follows:
Mon - Fri: 8 am - 6 pm, Sat: 10 am - 2 pm, Sun: 10 am - 4 pm
UK / NORTHERN IRELAND HELPLINE:
0870 7323023
REPUBLIC OF IRELAND HELPLINE:
1800 481005
WEB SUPPORT:
www.omegawolf.com/powercraft
Omega, Interex House, Prospect Close, Lowmoor Business Park
NG17 7LF Kirkby In Ashfield, England
Replacements or repairs under guarantee regulations are free of charge.
PS-750L
GB/IRE-0706-11
User Guide & Warranty
750W JIGSAW WITH LASER
After Sales Support
Now you have purchased a Power Craft
product you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have
the added peace of mind of dedicated
helplines and web support.
AFTER SALES SUPPORT
UK / N.IRELAND HELPLINE NO
0870 7323023
REP . IRELAND HELPLINE NO
1800 481005
WEB SUPPORT
www.omegawolf.com/powercraft
MODEL NUMBER: PS-750L
Need help?
Do you have a question about the PS-750L and is the answer not in the manual?
Questions and answers
Laser adjustment
To adjust the laser on the Power Craft PS-750L:
1. Clamp the workpiece firmly in place.
2. Remove any wood residue near the saw blade (do not use your hands; switch off the appliance first).
3. Hold the jigsaw blade against a straightedge or perfectly straight plank.
4. Switch the laser on.
5. Adjust the laser beam as needed for alignment.
Note: Bright light conditions may make the laser hard to see. The beam range is about 65 cm.
This answer is automatically generated